Trane CenTraVac™ Water-Cooled Chiller CVHF - 350-910 - 957 - 142L / 142L

Clean all water strainers in the water piping system

Inspect waterbox coatings within the first 1–3 months to determine a required maintenance schedule for your job site

Inspect waterbox anodes within the first 1–3 months to determine a required maintenance schedule for your job site

Sign off on the 3 Monthly Chiller Maintenance

Test appropriate sensors for accuracy

Ensure sensors are properly seated in wells with thermopaste installed

Check evaporator leaving water temperature low temperature cutout setpoint

Condenser high pressure switch check-out

Check adjustment and operation of the inlet guide vane actuator

Sign off on the control circuits inspection

Review the purge Installation, Operation, and Maintenance manual and follow maintenance and/or inspection items identified

Review overall operation of purge and service as necessary

Sign off on the purge unit inspection

- Shut down the chiller once each year to check the items of Oil System

1. Perform Annual oil analysis (follow recommendations)

2. Clean and lubricate oil system as required

5. Run oil pump and check differential oil pressure;

- Lubricate the vane control linkage bearings, ball joints, and pivot points

- Lubricate vane operator tang O- rings

- Lubricate the oil filter shutoff valve O-rings;