Stryker Stretcher 6500-201-000

Inspect hoses and fittings for damage or wear

Verify the hydraulic velocity fuse

Verify 'jog' function is operating

Verify high speed retract is working

Verify there is no damage or wear to either switch

Verify both switches operate correctly

Verify no bent, broken or damaged components

Verify no damage or tears on cot grips

Ambulance cot and fastener fit and function properly

Safety bar engages the vehicle safety hook properly

Cylinder is adjusted so the lock nut is tight and the cot stops moving when it hits the dead stops

Release handle returns to the stowed position

All welds intact, not cracked or broken

Warning labels present, legible

Optional wheel locks checked and adjusted as necessary

Sign off on the maintenance check

Verify the in-fastener shut-off is configured properly

Check routing(s) and connection(s), verify there are no hanging wires

Verify that the manual release functions properly

Inspect the ambulance cot frame/litter

Inspect patient restraints for proper function and no excessive wear

Inspect the ambulance cot frame/base

Verify all wheels secure, rolling and swiveling properly

Verify the safety bar operates properly

Motor mount fasteners are secure

No damage or pinching of wiring harness, cables or lines

Base extends/retracts smoothly when the manual release is engaged

With 100 lbs or more on the cot, the cot does not lower when the manual release is pulled

All the restraint straps are securely buckled around the patient

The cot can be in any position for rolling

When rolling the cot with a patient on it, position an operator at the foot end and one at the head end of the cot at all times

During transport, approach door sills and/or other low obstacles squarely and lift each set of wheels over the obstacle separately

Sign off on the ambulance cot motion maintenance