Schulz Air Compressor SRP4125FLEX

PROCEDURES BEFORE BEGINNING MAINTENANCE

ATTENTION: There are hot surfaces inside the compressor cabinet after its stop. The use of Schulz genuine lubricant oil and parts extends the useful life of your compressor, preventing, thus, the loss of the Warranty of you compressor.

Disconnect the compressor and make sure the tank has no pressure (wait for five minutes)

Disconnect the compressor from the power supply (disconnecting switch) and make sure the compressor cannot be inadvertently turned on

For compressors with remote command the used in group, you must put up a sign “In Service”, on the start switch

Close the valve between the compressed air system and the compressor

Replace coalescing pre-filter element*

PROCEDURES BEFORE BEGINNING MAINTENANCE

There are hot surfaces inside the compressor cabinet after its stop.

The use of Schulz genuine lubricant oil and parts extends the useful life of your compressor, preventing, thus, the loss of the Warranty of you compressor.

A. Disconnect the compressor and make sure the tank has no pressure (wait for five minutes)

B. Disconnect the compressor from the power supply (disconnecting switch) and make sure the compressor cannot be inadvertently turned on

For compressors with remote command the used in group, you must put up a sign “In Service”, on the start switch

C. Close the valve between the compressed air system and the compressor

1. Change lubricant oil mineral 4000*(8)

PROCEDURES BEFORE BEGINNING MAINTENANCE

ATTENTION: There are hot surfaces inside the compressor cabinet after its stop. The use of Schulz genuine lubricant oil and parts extends the useful life of your compressor, preventing, thus, the loss of the Warranty of you compressor.

Disconnect the compressor and make sure the tank has no pressure (wait for five minutes)

Disconnect the compressor from the power supply (disconnecting switch) and make sure the compressor cannot be inadvertently turned on

For compressors with remote command the used in group, you must put up a sign “In Service”, on the start switch

Close the valve between the compressed air system and the compressor

PROCEDURE FOR REPLACEMENT OF THE OIL FILTER

PROCEDURES BEFORE BEGINNING MAINTENANCE

ATTENTION: There are hot surfaces inside the compressor cabinet after its stop. The use of Schulz genuine lubricant oil and parts extends the useful life of your compressor, preventing, thus, the loss of the Warranty of you compressor.

Disconnect the compressor and make sure the tank has no pressure (wait for five minutes)

Disconnect the compressor from the power supply (disconnecting switch) and make sure the compressor cannot be inadvertently turned on

For compressors with remote command the used in group, you must put up a sign “In Service”, on the start switch

Close the valve between the compressed air system and the compressor

Clean the radiator and the condenser externally*(4)

PROCEDURES BEFORE BEGINNING MAINTENANCE

ATTENTION: There are hot surfaces inside the compressor cabinet after its stop. The use of Schulz genuine lubricant oil and parts extends the useful life of your compressor, preventing, thus, the loss of the Warranty of you compressor.

Disconnect the compressor and make sure the tank has no pressure (wait for five minutes)

Disconnect the compressor from the power supply (disconnecting switch) and make sure the compressor cannot be inadvertently turned on

For compressors with remote command the used in group, you must put up a sign “In Service”, on the start switch

Close the valve between the compressed air system and the compressor

1. Change lubricant oil synthetic 8000*(8)

PROCEDURE FOR CHANGING THE LUBRICANT OIL

Turn off the compressor and wait for at least 5 (five) minutes for the elimination of the pressure of the system