Nidec Auto Lensmeter LM-600P

CAUTION: Never use an organic solvent such as paint thinner. It may ruin the surface of the device.

CAUTION: Lightly wipe the exterior of the LCD. Scratches or malfunction of the display may result.

CAUTION: Never use a sponge or cloth soaked in water. The water may leak into the inside of the device and cause device malfunction.

Is the cover or panel of the device dirty?

Upload a photo of the dirty cover or panel

Did you wipe the dirty cover or panel with a soft cloth?

For severe stains, did you immerse the cloth in a neutral detergent, wring well, and wipe?

Did you finally wipe with a dry and soft cloth?

Sign off on the cleaning procedure

Warning: Turn off the power of the device before cleaning.

Is the Eye Care card slot visibly dirty?

Upload a photo of the dirty Eye Care card slot

Select the type of cleaner used

Did you wipe the Eye Care card with a soft cloth?

Did you immerse the cloth in a neutral detergent for persistent grime?

Did you wipe the Eye Care card with a dry and soft cloth after cleaning with detergent?

Note: The Eye Care card reader contacts are on the lower surface.

Did you insert the contact cleaner with the wiper part facing downward several times to clean the reader contacts?

If markings are faint, replace the ink cartridge. Use the specified cartridge for refills.

Upload a photo of the removed C-ring

When the C-ring is removed, the spring and cartridge fall off. Take care not to lose them.

Upload a photo of the new cartridge inserted into the marker holder

Match the shape of the cartridge to the hole of the marker holder by rotating until the cartridge can be inserted smoothly

Use the C-ring which is removed in the procedure 1 or the one attached to the cartridge as a replacement part.

If markings are faint, add some ink.

Warning: This procedure requires trained personnel!

Setscrew on the adjustable screw loosened

Note: The effective rotation range of the adjustable screw is one rotation, either clockwise or counterclockwise.

Setscrew on the adjustable screw tightened

Lens table lever attached and checked

Describe the feel of the lever movement

Sign off on the lens table adjustment

Warning: This procedure requires trained personnel!

Open the printer cover and remove the printer paper roll

Put the nozzle of an electric vacuum cleaner on the auto-cutter to vacuum the residue

Do not blow the residue. It may cause failure due to the residue becoming attached to the internal operation mechanism

Set the printer paper as it was

Sign off on the printer cleaning