MSA Automatic Battery Chargers CH-105

1 check completeness and appearance of the Product; mechanical damage, paint defects must be absent; marking plates shall be present; legends are to be read easily.

2 clean up the Product surfaces with clean cloth;

3 remove severe contamination, parts of corrosion, oil spots from the metal surfaces – using ethyl alcohol, avoiding its penetration inside the Product; all surfaces clean dry by clean cloth and dry up;

4 If varnish paint coating is damaged, polish it with sand paper, then clean with alcohol-soaked cloth, cover with varnish АК-113 and dry up

Check reliability of cable and bus connection to the Product

1 check that connectors and attaching screws are fastened tight; provide further fastening if needed.

2 check the cable integrity (mechanical damage shall be absent) within visibility

Check the Product’s operability

1 check completeness and appearance of the Product; mechanical damage, paint defects must be absent; marking plates shall be present; legends are to be read easily.

2 clean up the Product surfaces with clean cloth;

3 remove severe contamination, parts of corrosion, oil spots from the metal surfaces – using ethyl alcohol, avoiding its penetration inside the Product; all surfaces clean dry by clean cloth and dry up;

4 If varnish paint coating is damaged, polish it with sand paper, then clean with alcohol-soaked cloth, cover with varnish АК-113 and dry up

Check reliability of cable and bus connection to the Product

1 check that connectors and attaching screws are fastened tight; provide further fastening if needed.

2 check the cable integrity (mechanical damage shall be absent) within visibility

Check the Product’s operability