Motor Coach Industries International Coach D4505

Warning: This procedure requires trained personnel with PPE!

Is the vented filler cap installed on the reservoir cover?

Is the sight glass installed on the housing side?

Check the oil level at the center of the viewing glass

If the oil level is not at the center, add fluid as required

To change the filter element, loosen and remove the cover retaining nut and washer

Remove the filter element retaining spring and lift the element out of the reservoir housing

Reverse this procedure to install the new filter element

Latch plate in proper operation

Guide loops in proper operation

Warning: Keep sharp edges and sharp objects away from the belts and other parts of the restraint system.

No frayed, cut, or otherwise damaged webbing

Exterior Inspection (Walk-Around)

All windows, mirrors and lights are clean and unobstructed

Exterior of the coach is clear and clean of debris, and all service doors are secure

Wheel nuts are tight and wheels are undamaged

Remote control switch in the engine compartment is set for 'FRONT' operation

Main electrical switch, located behind battery door, is in the 'ON' position

No fluid leaks, animals, maintenance personnel or obstructions under the coach