Motor Coach Industries International Coach D4000

Lubricating Oil - Power Steering Reservoir & Pump

A vented filler cap is installed on the reservoir cover. A sight glass is installed on the housing side to visually check oil level. Correct level is seen at the center of the viewing glass.

This level corresponds to the "FULL" level reading on the dipstick. Check levels periodically and add fluid as required.

The filter element is changed by loosening and removing the cover retaining nut and washer.; Remove the filter element retaining spring and lift the element out of the reservoir housing.; Reverse this procedure to install the new filter element. Do not overtightened the cover retaining nut.;

Exterior Inspection (Walk-Around)

All windows, mirrors and lights are clean and unobstructed

Exterior of the coach is clear and clean of debris, and all service doors are secure

Wheel nuts are tight and wheels are undamaged

Remote control switch in the engine compartment is set for 'FRONT' operation

Main electrical switch, located behind battery door, is in the 'ON' position

No fluid leaks, animals, maintenance personnel or obstructions under the coach

Latch plate in proper operation

Guide loops in proper operation

Warning: Keep sharp edges and sharp objects away from the belts and other parts of the restraint system.

No frayed, cut, or otherwise damaged webbing