Manitowoc Ice Machine IDT1200W

Ensure safety equipment is worn

Is the ice machine top cover removed for easier access?

Open the front panel to access the evaporator compartment

Ensure no ice is on the evaporator

Remove all ice from the bin/dispenser

Press the Clean button and select 'Turn off when complete'

Water Fittings and Lines Inspection

Check all water fittings for leaks

Check all water lines for leaks

Refrigeration Tubing Inspection

Ensure refrigeration tubing is not rubbing against other tubing

Ensure refrigeration tubing is not vibrating against panels

Ensure nothing is placed in front of the ice machine

Is there adequate airflow around the ice machine?

Clean the area around the ice machine to maintain cleanliness and efficient operation.

Wipe surfaces with a damp cloth rinsed in water to remove dust and dirt.

If greasy residue persists, use a damp cloth with mild dish soap and water solution.

Wipe dry with a clean, soft cloth.

Ensure the following are not used on exterior panels and plastic trim pieces

Disconnect electric power to the ice machine at the electric service switch

Handle condenser fins with care to avoid injury

Clean the condenser at least every six months

Shine a flashlight through the condenser to check for dirt between the fins

Is there dirt between the fins?

Method of cleaning the condenser

Is the condenser clean after using compressed air or water?