Komatsu Forklift Trucks FG25C-14

Warning: This maintenance check requires trained personnel with PPE!

To prevent improper adjustment by untrained personnel, load and speed control screws have tamper-proof caps.

Check and adjust fuel injection pressure

Check and adjust atomizing condition of nozzles

Perform these operations to maintain compliance with EPA Diesel Exhaust Emission regulations.

Sign off on the forklift trucks maintenance

Every 2 weeks or every 100 hours service

Sign off on the forklift trucks maintenance

Steering link checked for bending, damage and wear

Steering knuckle checked for play, deformation and damage

Checked for marked variation in minimum turning radius

Change oil in differential case (clutch-type lift trucks, include transmission case)

Oil drained from differential case

Oil refilled in differential case

Oil level checked in differential case

Change oil in TORQFLOW transmission case

Oil drained from TORQFLOW transmission case

Fuel injection timing checked and adjusted?

Perform this operation to maintain compliance with EPA Diesel Engine Exhaust regulations.

LPG mixer air valve diaphragm replaced?

Replace more often in cold or severe service applications.

O-ring for LPG tank valve replaced?

Sign off on the 2000 Hourly Forklift Trucks Maintenance

Check wheel rims for deformation, cracking and damage

Check wheel bearings for play and abnormal noise

Check hydraulic cylinders for looseness, deformation, cracking, damage and wear

Check all piping/tubing/connectors for oil leakage, deformation or damage

Check operation of hydraulic cylinders

Check hydraulic drift of lift cylinder

Check hydraulic drift of tilt cylinders

Check movement of work equipment control lever(s)

Check forks and fork stopper for deformation, cracking, damage and wear