Keating of Chicago Electric Griddle 42x24

Ensure you have the necessary tools

Set thermostat to desired temperature (300°F recommended)

Allow thermostat to cycle three times

Locate 'L' on front of griddle plate above thermostat to be calibrated to locate thermostat bulb position

Place thermometer on plate over bulb halfway toward rear of griddle

Is the calibration of griddle less than 15°F off?

WARNING: DISCONNECT ELECTRIC POWER SOURCE BEFORE CLEANING

Clean grease build-up on switches

Clean grease build-up on thermostat knobs

NOTE: If grease gets into the body of the switch or thermostat, it may cause it to fail

WARNING: IF GREASE GETS INTO THE BODY OF THE SWITCH OR THERMOSTAT, IT MAY CAUSE POSSIBLE ELECTRICAL SHOCK

Ensure all parts of the cabinet are clean

Hand wash spatulas in mild to medium strength detergent

Avoid contact with Chlorine or bleach

Rub spatula with vegetable oil to slow discoloration

Carefully wipe blade with a dry cloth

Cover blade with plastic protection cover when not in use

Scrape MIRACLEAN® surface with the Keating Scraper

Clean with potable tap water and a Keating palmetto brush

Polish surface with Keating Klenzer

Rinse with potable water to remove excess Keating Klenzer

Inspect the surface for any remaining residue

Completely wipe down griddle cabinet

Is the griddle surface free of residue?

Is the grease drawer properly reinstalled?