Karcher Floor Scrubber BR 85/100 W Classic Bp

Drain the fresh water tank and flush out deposits

Clean the float and fluff filter

Check battery poles for oxidation, brush off if necessary. Make sure the connection cables are firmly in place

Clean the seals between the waste water tank and the cover, check for leaks and replace if necessary

Check the acid density of the cells if the batteries are not maintenance-free

If the device is not used for a longer period of time, shut down the device when the batteries are fully charged. Fully charge the battery at least once a month

When used regularly, charge the battery fully and without interruption at least once a week

Have the prescribed inspection performed by Customer Service every year

Open the waste water tank cover

Pull the coarse dirt filter upwards and off

Rinse off the coarse dirt filter under running water

Reinsert the coarse dirt filter into the waste water tank

Sign off on the filter cleaning

Press the brush replacement pedal down, beyond the zone of resistance

Pull the 1st disc brush sideways and out from underneath the cleaning head

Hold the new disc brush under the cleaning head, then press upwards and latch it into position

Repeat the procedure for the 2nd disc brush

Sign off on the disc brushes replacement

Open the waste water tank cover

Pull the float housing downwards and off

Remove the float from the float housing and clean it

Remove the fluff filter and clean it

Assemble all parts in the reverse order

ATTENTION: Risk of damage! Do not spray the device with water and do not use aggressive detergents.

Rinsed the waste water tank with clear water

Cleaned the exterior of the device using a damp cloth, wetted with a mild washing lye

Checked the fluff filter and cleaned if required

Only BR variants: Removed and emptied the coarse dirt receptacle

Only BR variants: Cleaned the water distribution channel

Cleaned the suction lips, checked for wear and adjusted the height or replaced if necessary