The John Deere Tractor 6115D is a robust agricultural machine designed for efficiency and reliability in various farming tasks. Known for its powerful engine and advanced features, this tractor is ideal for both small and large-scale operations, ensuring optimal performance in the field.

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant

PDF MANUAL

Manual for John Deere Tractor 6115D

MAINTENANCE RESOURCES

Complete asset maintenance, one click away

Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.

Documents & Manuals

Find all the essential guides in one place.

Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more

Work Order Templates

Pre-built workflows to keep your asset running smoothly.

Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more

Procedures

Integrate maintenance plans directly into your work orders.

Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more

Parts

Access the parts list for your equipment in MaintainX.

Drive Motor
B2 Rollers
Tensioning System
+ 40 more

John Deere Tractor 6115D

Create an account to install this asset package.

Maintenance Plans for John Deere Tractor Model 6115D

Integrate maintenance plans directly into your work orders in MaintainX.

1000 Hourly Maintenance

Change transmission-hydraulic oil and filter

1. Move rockshaft lever full forward to lower hitch all the way down.

2. Remove drain plugs (A-E).

3. Replace transmission-hydraulic oil filter. (See procedure in this section.)

4. Install all plugs.

5. Remove cap (B) and fill system with oil as specified in Fuels, Lubricants and Coolant section.

6. Check oil level at sight glass (A) after filling.

7. Install filler cap.

8. Start engine and operate for five minutes.

Run this procedure

100 Hourly Maintenance

Transmission-hydraulic oil filter replaced?

Engine oil and filter changed?

MFWD axle and wheel hub oil changed?

Sign off on the 100 hourly maintenance

Run this procedure

10 Hourly / Daily Maintenance

Check engine oil level

Check coolant level

1. Raise hood.

2. Check level in coolant reservoir BEFORE starting tractor.

3. If engine is COOL and level is below MIN COLD mark, remove cap and add coolant to reservoir to bring level between MIN and MAX COLD mark.

4. Install cap and lower hood.

Drain water from fuel filters

1. Disconnect wiring harness (A).

2. Connect a small hoses to end of drains (B).

Run this procedure

1500 Hourly Maintenance

Clean engine crankcase vent tube (OCV)

Service Exhaust Filter

2000 Hourly / 2 Yearly Maintenance

Drain, flush and refill engine cooling system

Adjust engine valve clearance

5000 Hourly / 5 Yearly Maintenance

Drain, flush and refill engine cooling system

Test or replace thermostat

Sign off on the 1500 Hourly Maintenance

Run this procedure

250 Hourly Maintenance

Inspect engine air intake filters

A dual element air cleaner is standard. A dirty primary element is indicated when air restriction indicator on instrument panel illuminates. A dirty element can result in loss of power or excessive smoke.

Clean primary element when indicator on instrument panel illuminates or every 250 hours.

Both elements should be replaced at the same time annually, regardless of condition.

1. Raise hood.

2. loosen latch (A) and remove cover (B).

3. Pull out primary filter element (A). Do not use excessive force. If filter does not pull out with ease, move side-to- side to remove safely.

4. Clean primary element by tapping on palm of your hand.

5. Check rubber seal around filter element for cracks and holes. Replace if element shows any imperfections.

Run this procedure