JCB Rough Terrain Forklift 930

Cooling System Drain and Refill

Air Cleaner Dust Valve(4) Change

Air Cleaner Outer Element(4) Change

Air Cleaner Inner Element(4) Change

Water Separator and Engine Fuel Filter Drain

Water Separator Fuel Filter(5) Change

Front End Accessory Drive (FEAD) Belt Condition Check

WARNING: Over adjustment of the park brake could result in the park brake not fully releasing.

Park brake disengaged (lever horizontal)?

Handle grip A turned clockwise, half a turn?

Is there more adjustment and pin B is not at the end of its travel?

If there is no more adjustment and pin B is at the end of its travel get the brake checked by your JCB dealer.

Sign off on the park brake adjustment

WARNING: To avoid burning wear personal protective equipment (PPE) when handling hot components. To protect your eyes, wear personal protective equipment (PPE) when using a brush to clean components.

WARNING: Airborne particles of light combustible material such as straw, grass, wood shavings, etc. must not be allowed to accumulate within the engine compartment or in the propshaft guards (when fitted). Inspect these areas frequently and clean at the beginning of each work shift or more often if required. Before opening the engine cover, ensure that the top is clear of debris.

CAUTION: Never use water or steam to clean inside the cab. The use of water or steam could damage the on-board computer and render the machine inoperable. Remove dirt using a brush or damp cloth.

Pay particular attention to the following areas:

If the radiator tubes/fins get clogged the radiator will be less efficient.

b Open the bonnet and clean the radiator. Brush off all debris from the cooler tubes and fins. Make sure the loosened material is brushed out of the cooler enclosure.

c Close the bonnet and fit radiator grille.

Coolant Quality and Level Check

Air Cleaner Dust Valve(4) Change

Air Cleaner Outer Element(4) Change

Water Separator and Engine Fuel Filter Drain

Water Separator Fuel Filter(5) Change

Front End Accessory Drive (FEAD) Belt Condition Check

Engine Mounting Bolts for Tightness Check

Coolant Quality and Level Check

Water Separator and Engine Fuel Filter Drain

Engine Mounting Bolts for Tightness Check

Rear Axle Differential Oil Level (4WD) Check