Ingersoll Rand Air Compressor TS5

Inspect for air leaks. Squirt soapy water around joints during compressor operation and watch for bubbles

Check tightness of screws and bolts. Tighten as needed

Inspect drive belts. Adjust if necessary

Check lubricant level. Fill as needed

Test drain valve for proper operation. Clean if needed

Drain receiver tank condensate. (if automatic draining device is not provided). Open the manual drain valve and collect and dispose of condensate accordingly

Check for unusual noise and vibration

Ensure beltguards and covers are securely in place

Ensure area around compressor is free from rags, tools, debris, and flammable or explosive materials;

Change synthetic lubricant while crankcase is warm;

Change petroleum lubricant while crankcase is warm

Drain compressor oil and clean oil sight glass

Observe operation of safety/relief valves while the compressor is running. Replace safety/relief valves that do not operate freely

Inspect air filter element. Clean or replace if necessary;