Hoshizaki Modular Flaker F-801MAH-C

Ensure only qualified service technicians are servicing the appliance.

Verify hands are dry before touching the icemaker power switch or control switch.

Move the icemaker's power switch to the 'OFF' position.

Place the disconnect in the off position, if applicable.

Lockout/Tagout to prevent the power supply from being turned back on inadvertently.

Ensure all components, fasteners, and thumbscrews are securely in place after maintenance.

Ensure only qualified service technicians are servicing the appliance.

Verify hands are dry before touching the icemaker power switch or control switch.

Move the icemaker's power switch to the 'OFF' position.

Place the disconnect in the off position, if applicable.

Lockout/Tagout to prevent the power supply from being turned back on inadvertently.

Ensure all components, fasteners, and thumbscrews are securely in place after maintenance.

Ensure only qualified service technicians service the appliance.

Verify hands are dry before touching the icemaker power switch or control switch.

Move the icemaker's power switch to the 'OFF' position.

Place the disconnect in the off position, if applicable.

Perform Lockout/Tagout to prevent the power supply from being turned back on inadvertently.

Ensure all components, fasteners, and thumbscrews are securely in place after maintenance

Ensure only qualified service technicians perform the maintenance.

Verify that the icemaker power switch and control switch are not touched with damp hands.

Confirm the icemaker's power switch is in the 'OFF' position and the power supply is turned off.

Ensure Lockout/Tagout procedures are in place to prevent accidental power supply activation.

Check that all components, fasteners, and thumbscrews are securely in place after maintenance.

Cleaning and Sanitizing Instructions

Ensure ammonia type cleaners are not used.

Wear liquid-proof gloves and goggles during cleaning and sanitizing.

Ensure only qualified service technicians are servicing the appliance.

Verify that the icemaker power switch and control switch are not touched with damp hands.

Confirm the icemaker's power switch is in the 'OFF' position.

Ensure the power supply is turned off and disconnect is in the off position.

Lockout/Tagout to prevent the power supply from being turned back on inadvertently.

Ensure all components, fasteners, and thumbscrews are securely in place after maintenance.

Verify that no components have fallen into the dispenser unit/ice storage bin.