Hoshizaki Stackable Crescent Cuber KM-1400SWH3-M

WARNING: Only qualified service technicians should service the appliance.

To reduce the risk of electric shock, do not touch the control switch or service switch with damp hands.

Before servicing: Move the control switch to the 'OFF' position and turn off the power supply. Place the disconnect in the 'OFF' position. Lockout/Tagout to prevent the power supply from being turned back on inadvertently.

CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place after any maintenance is done to the icemaker. Make sure that none have fallen into the dispenser unit/ice storage bin.

Did contaminated seawater enter the system?

If contaminated seawater entered the system, flush with clean seawater or fresh water as soon as possible to minimize damage to the condenser.

Sign off on the Marine Model Condenser Maintenance

WARNING: Only qualified service technicians should service the appliance.

To reduce the risk of electric shock, do not touch the control switch or service switch with damp hands.

Before servicing: Move the control switch to the 'OFF' position and turn off the power supply. Place the disconnect in the 'OFF' position. Lockout/Tagout to prevent the power supply from being turned back on inadvertently.

CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place after any maintenance is done to the icemaker. Make sure that none have fallen into the dispenser unit/ice storage bin.

Control switch moved to the 'OFF' position?

Disconnect placed in the 'OFF' position?

Lockout/Tagout performed to prevent the power supply from being turned back on inadvertently?

More frequent maintenance may be required depending on water quality, the appliance's environment, and local sanitation regulations

Only qualified service technicians should service the appliance.

To reduce the risk of electric shock, do not touch the control switch or service switch with damp hands

Before servicing: Move the control switch to the \OFF\" position and turn off the power supply. Place the disconnect in the \"OFF\" position. Lockout/Tagout to prevent the power supply from being turned back on inadvertently."

CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place after any maintenance is done to the icemaker. Make sure that none have fallen into the dispenser unit/ice storage bin.

Wash with warm water and neutral cleaner if dirty every 2 weeks.

More frequent maintenance may be required depending on water quality, the appliance's environment, and local sanitation regulations

Only qualified service technicians should service the appliance.

To reduce the risk of electric shock, do not touch the control switch or service switch with damp hands

Before servicing: Move the control switch to the "OFF" position and turn off the power supply. Place the disconnect in the "OFF" position. Lockout/Tagout to prevent the power supply from being turned back on inadvertently.

CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place after any maintenance is done to the icemaker. Make sure that none have fallen into the dispenser unit/ice storage bin.

Inspect. Clean if necessary by using a brush or vacuum cleaner. More frequent cleaning may be required depending on location.;

More frequent maintenance may be required depending on water quality, the appliance's environment, and local sanitation regulations

Only qualified service technicians should service the appliance.

To reduce the risk of electric shock, do not touch the control switch or service switch with damp hands

Before servicing: Move the control switch to the 'OFF' position and turn off the power supply. Place the disconnect in the 'OFF' position. Lockout/Tagout to prevent the power supply from being turned back on inadvertently.

CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place after any maintenance is done to the icemaker. Make sure that none have fallen into the dispenser unit/ice storage bin.

Is the control switch in the 'OFF' position?

Is the power supply turned off?