Haulotte Haulotte Mobile Elevating Work Platform HA46RTJ PRO HA46RTJ PRO

- The tire and rim are bonded together, both must be replaced if either is damaged.

Wheels replacement must be made in the following cases:

- Deformation or cracks on the rim.

- De-bonding between the interface of the steel and the rubber.

- Uniform wear to the wearing line:

• 830 x 285 wheel: Ø 830 mm / 33 in1025 x 365 wheel (Optional) : Ø 962 mm / 41 in

• 1025 x 365 wheel (Optional) : Ø 962 mm / 41 in

- Non-linear wearing of the tread profile (> 10%)

- 1 wheel stud is completely torn.

- The Major inspection is a thorough evaluation of the machine's integrity and proper functioning; after a normal service life of 10 years.

This evaluation must take place after 10 years of operation and then repeated every 5 years thereafter.

The severity of operating conditions may require frequent inspections.

This inspection is the responsibility of the owner, and it must be conducted by a HAULOTTE Services® technician or by a competent company or person.

- The Reinforced inspection is a thorough evaluation of the machine's structural components, to ensure proper functionality of the machine.

This evaluation must occur at a frequency of 5000 hours or every 5 years.

This inspection is the responsibility of the owner, and it must be conducted by a HAULOTTE Services® technician or by a competent company or person.

Warning: Maintenance must be carried out by a competent company or person familiar with mechanical procedures.

Has the machine been out of service or not in use for more than 3 months?

If the machine has been out of service or not in use for more than 3 months, it must undergo a periodic inspection before being put back into service.

Did the machine pass the periodic inspection?

If the machine did not pass the inspection, describe the issues found.

Upload a photo of the machine after maintenance.

Sign here to confirm that the maintenance operations performed have been recorded in the machine's register/log book.

Warning: This inspection must be carried out by a competent company or person.

Select the frequency of inspection

Did the inspection detect any defect which could lead to an accident during routine use of the machine?

Upload the inspection results to the safety register or machine log book

Was the periodic inspection conducted before the sale / resale of the machine and/or at least once every year?