Hammer Strength Hammer Strength Plate-Loaded PL-4W

Inspect frames for wear and damage

Inspect hand grips for wear and damage

Inspect all accessories, connecting links, and carabiner clips for wear

Check for belt stretch on PLBI and adjust as necessary by loosening the belt clamp on top of the lower movement arm, then pulling loose end of belt to tighten. Tighten belt clamp down

Sign off on the weekly strength training machine maintenance

Washed the unit with approved or compatible cleaners using a clean sponge or a soft cloth

Dried thoroughly with a chamois or moist cellulose sponge to prevent water spots

Removed fresh paint splashes, grease and smeared glazing compounds before drying by rubbing lightly with isopropyl alcohol

Made a warm final wash, beginning with a mild soap or detergent solution and ending with a thorough rinsing with clean water

HAMMER STRENGTH APPROVED CLEANERS

Applied the spray to a microfiber cloth and wiped down the equipment

Fill in paint chips with manufacturers touch-up paint

Visually inspect all hardware for loosening, tampering or wear

Use an approved or compatible cleaner for hand grips

Sign off on the machine maintenance

1. Clean Upholstery with an approved or compatible cleaner.

Wipe down upholstery with a mild soap and water or comparable all purpose cleaner.

2. Inspect Belts. Look for wear or damage and proper tension. Pay close attention at bends and attachment points.

Visually inspect belts for wear at and around connections and along the entire length of the belt. Always replace at first sign of wear.