Hammer Strength Hammer Strength Plate-Loaded PL-TIB

1. Clean Upholstery with an approved or compatible cleaner.

Wipe down upholstery with a mild soap and water or comparable all purpose cleaner.

2. Inspect Belts. Look for wear or damage and proper tension. Pay close attention at bends and attachment points.

Visually inspect belts for wear at and around connections and along the entire length of the belt. Always replace at first sign of wear.

Fill in paint chips with manufacturers touch-up paint

Visually inspect all hardware for loosening, tampering or wear

Use an approved or compatible cleaner for hand grips

Sign off on the machine maintenance

Inspect frames for wear and damage

Inspect hand grips for wear and damage

Inspect all accessories, connecting links, and carabiner clips for wear

Check for belt stretch on PLBI and adjust as necessary by loosening the belt clamp on top of the lower movement arm, then pulling loose end of belt to tighten. Tighten belt clamp down

Sign off on the weekly strength training machine maintenance

Wash the unit with approved or compatible cleaners using a clean sponge or a soft cloth. Rinse well with clean water. Dry thoroughly with a chamois or moist cellulose sponge to prevent water spots.

Fresh paint splashes, grease and smeared glazing compounds can be removed easily before drying by rubbing lightly with isopropyl alcohol. Afterward, a warm final wash should be made, beginning with a mild soap or detergent solution and ending with a thorough rinsing with clean water.

2. HAMMER STRENGTH APPROVED CLEANERS

Two preferred cleaners have been approved by HAMMER STRENGTH reliability experts: PureGreen 24 and Gym Wipes. Both cleaners will safely and effectively remove dirt, grime and sweat from equipment.

PureGreen 24 and the Antibacterial Force formula of Gym Wipes are both disinfectants that are effective against MRSA and H1N1. PureGreen 24 is available in a spray which is convenient for gym staff to use.

Apply the spray to a microfiber cloth and wipe down the equipment. Use PureGreen 24 on the equipment for at least 2 minutes for general disinfection purposes and at least 10 minutes for fungus and viral control.

Gym Wipes are large, durable pre-moistened wipes to use on the equipment before and after workouts. Use Gym Wipes on the equipment for at least 2 minutes for general disinfection purposes. Contact Customer Support Services to order these cleaners (1-800-351-3737 or email: customersupport@ lifefitness.com).

3. HAMMER STRENGTH COMPATIBLE CLEANERS