

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

GMC Vehicle Terrain
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
10 Yearly / 161 000 km /100,000 mi Hood And/Or Body Lift Support Gas Struts Replacement
Warning: If the gas struts that hold open the hood, trunk, and/or liftgate fail, you or others could be seriously injured. Take the vehicle to your dealer for service immediately.
Gas strut(s) present in the vehicle?
Gas strut(s) providing enough force to hold the hood/trunk/liftgate?
If struts are failing to hold the hood/trunk/liftgate, do not operate. Have the vehicle serviced.
Upload a photo of the gas strut(s)
Any signs of wear, cracks, or other damage on the gas strut(s)?
Describe the observed damage
Sign off on the gas strut(s) inspection
12 000 km / 7,500 mi Tire Rotation
Warning: This procedure requires trained personnel with PPE!
Tires rotated according to the Maintenance Schedule?
Unusual wear noticed?
Describe the unusual wear if any
If unusual wear continues after rotation, check wheel alignment.
Use the specified rotation pattern when rotating the tires.
Compact spare tire excluded from the rotation?
Enter the recommended inflation pressure for front tires
Enter the recommended inflation pressure for rear tires
1 Monthly Tire Pressure Check
Warning: Incorrect tire pressure can lead to tire overloading, overheating, premature wear, poor handling, reduced fuel economy or range, unusual wear, rough ride, and needless damage from road hazards.
The recommended pressure is the minimum air pressure needed to support the vehicle's maximum load carrying capacity.
Never load the vehicle with more weight than it was designed to carry.
Vehicle loaded within its maximum load carrying capacity?
Check the pressure of the tires once a month or more. Do not forget the spare, if the vehicle has one.
Enter the current tire pressure
Enter the recommended tire pressure from the Tire and Loading Information label
Does the current tire pressure match the recommended pressure?
If the inflation pressure is low, add air until the recommended pressure is reached. If the inflation pressure is high, press on the metal stem in the center of the tire valve to release air.
1 Monthly Tires Inspection
Tires
Every new GM vehicle has high-quality tires made by a leading tire manufacturer.
See the warranty manual for information regarding the tire warranty and where to get service. For additional information refer to the tire manufacturer.
Warning
• Poorly maintained and improperly used tires are dangerous.
• Overloading the tires can cause overheating as a result of too much flexing. There could be a blowout and a serious crash.
• Underinflated tires pose the same danger as overloaded tires. The resulting crash could cause serious injury. Check all tires frequently to maintain the recommended pressure. Tire pressure should be checked when the tires are cold.
• Overinflated tires are more likely to be cut, punctured, or broken by a sudden impact — such as when hitting a pothole. Keep tires at the recommended pressure.
• Worn or old tires can cause a crash. If the tread is badly worn, replace them.
1 Yearly Steering, Suspension, And Chassis Components Inspection
Steering, Suspension, and Chassis Components
Inspect steering, suspension, and chassis components for damaged, loose, or missing parts or signs of wear
Inspect power steering for proper attachment, connections, binding, leaks, cracks, chafing, etc.
Check constant velocity joint boots and axle seals for leaks
Upload a photo of the inspected components
Sign off on the inspection
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













