Fluid Components International Flowmeter STP102

Ensure all environmental isolation seals are properly maintained

Use standard ESD precautions when handling the electronics

Verify the calibration of the output

Ensure all environmental isolation seals are properly maintained

Use standard ESD precautions when handling electronics

Electrical Connections Inspection

Inspect cable connections on terminal strips and terminal blocks

Are terminal connections tight and physically sound?

Check for signs of corrosion on terminal connections

Ensure all environmental isolation seals are properly maintained to avoid hazards to personnel.

Use standard ESD precautions when handling the electronics.

Flow Element Assembly Inspection

Remove the flow element for inspection based on historical evidence of debris, foreign matter, or scale build-up.

Ensure thermowells are free of excessive contaminants and are physically intact.

Is there any debris or residue build-up on the flow element?

Ensure all environmental isolation seals are properly maintained

Use standard ESD precautions when handling the electronics

Verify moisture barriers are adequate in the local enclosure

Verify moisture barriers are adequate in the remote enclosure

Check that no moisture is entering the local enclosure

Check that no moisture is entering the remote enclosure

Ensure all environmental isolation seals are properly maintained to avoid hazards to personnel.

Use standard ESD precautions when handling the electronics.

Flow Element Connections Inspection

Verify that all seals are performing properly and that there is no leakage of the process media.

Check for deterioration of the gaskets.

Check for deterioration of the environmental seals.