Fluid Components International Flowmeter ST102

Ensure all environmental isolation seals are properly maintained

Use standard ESD precautions when handling the electronics

Verify moisture barriers are adequate in the local enclosure

Verify moisture barriers are adequate in the remote enclosure

Check that no moisture is entering the local enclosure

Check that no moisture is entering the remote enclosure

Ensure all environmental isolation seals are properly maintained

Use standard ESD precautions when handling the electronics

Inspect the following for signs of wear or damage

Are the conductors free from corrosion?

Is the cable insulation free from signs of deterioration?

Ensure all environmental isolation seals are properly maintained to avoid hazards to personnel.

Use standard ESD precautions when handling the electronics.

Flow Element Connections Inspection

Verify that all seals are performing properly and that there is no leakage of the process media.

Check for deterioration of the gaskets.

Check for deterioration of the environmental seals used.

Ensure all environmental isolation seals are properly maintained

Use standard ESD precautions when handling the electronics

Verify the calibration of the output

Refer to Chapter 4: Troubleshooting for calibration verification

Refer to 'ESD Precautions' on page 13

Ensure all environmental isolation seals are properly maintained

Use standard ESD precautions when handling the electronics

Electrical Connections Inspection

Inspect cable connections on terminal strips and terminal blocks

Verify that terminal connections are tight and physically sound

Check for signs of corrosion on terminal connections