Ergoline Vertical Stand-Up Tanning Booth Sunrise 480

Inspect acrylic panels for fingerprints and soiling

Remove fingerprints and other soiling carefully

Ensure no dry cloth is used to avoid scratching

Confirm no concentrated disinfectants or solvents are used

Use warm water and soft chamois leather for cleaning

Ensure no aggressive cleaning agents are used

Remove rings, watches, bracelets before cleaning

Ensure the canister is genuine and not filled with tap water or other liquids.

Verify that no liquid from the old canister is added to the new canister.

Confirm the maximum temperature for transport and storage is not exceeded.

Check the expiration date on the canister.

Unscrew the lid on the new canister.

Ensure the AQUA SYSTEM canister is not filled with tap water or other liquids.

Verify that only a genuine AQUA SYSTEM canister is used for replacement.

Do not add any remaining liquid from the old canister to the new canister.

Ensure the maximum temperature specified is not exceeded during transport and storage.

Check the expiration date on the canister.

Cleaning or Replacing UV Lamps in the Door

Remove fingerprints and other soiling carefully

Remove the screws and remove door handle

Remove the screws and remove the acrylic panel

Loosen screws 3-4 mm and take off the upper lamp cover

Ensure lamps and metal parts have cooled down sufficiently before replacing

Disconnect the device from the mains power immediately if bulb/lamp glass breaks

Ventilate the room for at least 15 minutes

Refer to page 58 for replacing lamps

Refer to page 59 for replacing starters

Reassemble the parts in reverse order