Epson Multimedia Projector EB-FH06

Warning: Before cleaning any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except as specifically explained in this manual. Dangerous electrical voltages in the projector can injure you severely.

Projector turned off and power cord unplugged

Clean the projector's lens periodically, or whenever you notice dust or smudges on the surface.

Lens is clean and free of dust or smudges

Warning: Do not use any flammable gas sprays such as air dusters to blow off dust. The high heat generated by the projector may cause a fire.

Attention: Do not wipe the lens right after you turn off the projector. Doing so could damage the lens.

Lens not wiped immediately after turning off the projector

Do not use any harsh materials to clean the lens and do not subject the lens to any impacts; otherwise, it could be damaged.

Is the projector turned off and unplugged?

Upload a photo of the dusty air filter or vents

Was the dust gently removed using a small vacuum or a very soft brush?

Do not rinse the air filter in water, or use any detergent or solvent to clean it.

Do not use canned air. The gases may leave a flammable residue or push dust and debris into the projector's optics or other sensitive areas.

Is the dust difficult to remove or the air filter is damaged?

If dust is difficult to remove or the air filter is damaged, replace the air filter.

Sign off on the air filter and vents cleaning

Warning: Before cleaning any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except as specifically explained in this manual. Dangerous electrical voltages in the projector can injure you severely.

Projector turned off and power cord unplugged

To remove dust or dirt, use a soft, dry, lint-free cloth.

Dust and dirt removed with a soft, dry, lint-free cloth

To remove stubborn dirt, use a soft cloth moistened with water and mild soap. Do not spray liquid directly on the projector.

Stubborn dirt removed with a soft cloth moistened with water and mild soap

Attention! Do not use wax, alcohol, benzene, paint thinner, or other chemicals to clean the projector case. These can damage the case. Do not use canned air, or the gases may leave a flammable residue.

No prohibited cleaning materials used

Sign off on the projector case cleaning

Warning: Ensure the projector is turned off and unplugged before starting the procedure.

Is the air filter torn or damaged?

Dispose of used air filters according to local regulations.

Is the new air filter placed correctly in the projector?

Sign off on the air filter replacement

Warning: The lamp may explode if used beyond the replacement period. Replace as soon as the replacement message appears.

Warning: Do not repeatedly turn off and on the projector. It may shorten the lamp's life.

Warning: Always have a spare lamp unit ready.

Warning: Use of non-genuine lamps may affect projection quality and safety.

Warning: Let the lamp fully cool before replacing it to avoid injury.

Warning: Never disassemble or modify the lamp. It could cause a fire, electric shock, or other damage or injury.

Turn off the projector and unplug the power cord.

Allow the projector lamp to cool down for at least one hour.

Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp cover.