

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Eppendorf Freezer C760
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
Electrical Components Maintenance
NOTICE! Risk of material damage
• Maintenance, adjustment and repair work should be carried out only by QUALIFIED, EXPERIENCED personnel who have been AUTHORIZED to undertake such work by Eppendorf or its authorized agents.
• Failure to use authorized service agents will invalidate the warranty.
7.2.5 Electrical components
WARNING! Risk of personal injury
• During routine maintenance, care must be taken to avoid any damage to the gaskets and sealing grommets of these enclosures; also check the gaskets and sealing grommets routinely to ensure their integrity.
Should any damage or deformity be detected, the gasket and/or sealing grommet must be replaced immediately.
• Failure to observe this safety warning will invalidate the warranty and could result in a dangerous situation.
7.2.5.1 Lamps
Freezer Defrosting
NOTICE! Risk of material damage. Maintenance, adjustment and repair work should be carried out only by QUALIFIED, EXPERIENCED personnel who have been AUTHORIZED to undertake such work by Eppendorf or its authorized agents. Failure to use authorized service agents will invalidate the warranty.
NOTICE! Risk of material damage. Do not attempt to chip or scrape the ice with a sharp instrument. Allow the ice to melt naturally.
De-activate the alarm by switching the battery (alarm) switch (located behind the lockable panel on the front of the freezer) to off (0).
Unplug the freezer from the mains/electrical supply.
Leave the inner and outer doors or lids open.
Allow the accumulated ice to melt.
Mop up the resulting water.
Dry and decontaminate the interior of the freezer.
When defrosting is complete, reconnect the freezer to the mains/electrical supply.
1 Monthly Door or Lid Seal Cleaning
NOTICE! Risk of material damage
Maintenance, adjustment and repair work should be carried out only by QUALIFIED, EXPERIENCED personnel who have been AUTHORIZED to undertake such work by Eppendorf or its authorized agents.
Failure to use authorized service agents will invalidate the warranty.
7.1.5 Door or lid seal
Be sure to treat the door or lid seal with care. Avoid damaging this seal in any way. The freezer cannot operate properly with a defective seal.
It is advisable to wipe both the seal and the surface against which it seals with a soft dry cloth once a month.
Seal and surface against which it seals wiped with a soft dry cloth
Sign off on the door or lid seal cleaning
3 Monthly Grille Cleaning
NOTICE! Risk of material damage
Maintenance, adjustment and repair work should be carried out only by QUALIFIED, EXPERIENCED personnel who have been AUTHORIZED to undertake such work by Eppendorf or its authorized agents.
Failure to use authorized service agents will invalidate the warranty.
Serious damage to the freezer may result if the air intake is blocked. Check that there is no obstruction of the airflow to the freezer. The air intake filter must also be cleaned regularly.
Air intake unblocked?
Filter cleaned regularly?
Remove the filter from behind the grille by turning the thumbscrews ¼ turn and opening grille downward. The filter should be washed in warm soapy water and left to air dry before replacing.
Filter removed and cleaned?
The air intake grille must be cleaned regularly to keep it free from dust and debris. Under normal conditions, clean the grille once every three months. If the area around the freezer is very dusty or dirty, clean the grille more often.
Freezer Cleaning
7.1 Cleaning
NOTICE! Risk of material damage
• Maintenance, adjustment and repair work should be carried out only by QUALIFIED, EXPERIENCED personnel who have been AUTHORIZED to undertake such work by Eppendorf or its authorized agents.
• Failure to use authorized service agents will invalidate the warranty.
7.1.1 Painted surfaces
All exterior paint work and inner doors should be cleaned using a solution of mild detergent in water. Do not use abrasive cleaners or solvents.
7.1.2 Interior and shelves
The interior panels and shelves are made of stainless steel. They may be cleaned using a recommended cleaning solvent, 70 % Isopropyl alcohol 30 % distilled water applied with a lint free cloth.;
Access the parts list for your equipment in MaintainX.
U101 Upright Freezer, 115 V
U9420-0000
U101 Upright Freezer, 208 - 230 V
U9420-0002
U101 Upright Freezer, 230 V
U9420-0001
U535 Upright Freezer, 115 V
U9430-0000
U535 Upright Freezer, 208 - 230 V
U9430-0002
U101 Upright Freezer, 115 V
U9420-0000
U101 Upright Freezer, 208 - 230 V
U9420-0002
U101 Upright Freezer, 230 V
U9420-0001
U535 Upright Freezer, 115 V
U9430-0000
U535 Upright Freezer, 208 - 230 V
U9430-0002
U101 Upright Freezer, 115 V
U9420-0000
U101 Upright Freezer, 208 - 230 V
U9420-0002
U101 Upright Freezer, 230 V
U9420-0001
U535 Upright Freezer, 115 V
U9430-0000
U535 Upright Freezer, 208 - 230 V
U9430-0002
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













