Eaton Switchboard Pow-R-Command

Check all grills and ventilation ports for obstructions and accumulations of dirt

Clean ventilation ports, if necessary

For switchboards installed outdoors, inspect the air space under the switchboard to be sure that it is clean and clear of debris, leaves, and obstructions

Sign off on the ventilation maintenance

Visual inspection for discoloration, cracking, scorching, overheating, or broken parts

Operating mechanism opens and closes properly

Breaker showing signs of any issues

If breaker shows signs of any issues, it should be replaced

Sign off on the circuit breaker inspection

Warning: This maintenance check requires trained personnel with PPE!

Visual check for damage on bus bar and structure insulation

Upload a photo of the damaged parts

Choose the type of service done

Sign off on the insulation maintenance

Switching mechanism and fuse connections visually inspected

Fusible devices visually inspected for signs of discoloration, cracking, scorching, overheating, or broken parts

Any worn parts or the entire switch replaced

Inspect bus bar and cables for visible damage

Visually inspect connections for overheating and damage

All bus bar and cable connections checked and torqued in accordance with labeling on the switchboard

Inspect for broken wire strands and pinched or damaged insulation on cable connections