Donaldson Dust Collector DFO 2-2

Check the compressed air components for damage or wear

Drain moisture following the manufacturer’s instructions

Is the compressed-air supply ON?

Check the cleaning valves for leaks

Check the solenoid valves for leaks

List any components that need repair or replacement

Sign off on the compressed air components inspection

Filter Removal and Installation ⚠ CAUTION

Use proper safety and protective equipment when removing contaminants and filters

Dirty filters may be heavier than they appear

Use care when removing filters to avoid personal injury and/or property damage

Turn power off and lock out all power before performing service or maintenance work

Turn compressed air supply OFF, bleed and lock out lines before performing service or maintenance work

Do not operate with missing or damaged filters

1. Start at the top access port

Instruct all personnel on safe use and maintenance procedures

Use proper equipment and adopt all safety precautions needed for servicing equipment

Use appropriate access equipment and procedures. Note the standard collector is not equipped with access platforms unless noted on the specification drawings

Electrical service or maintenance work must be performed by a qualified electrician and comply with all applicable national and local codes

Turn power off and lock out all power before performing service or maintenance work

Do not install in classified hazardous atmospheres without an enclosure rated for the application

Turn compressed air supply OFF, bleed and lock out lines before performing service or maintenance work