Daikin Outdoor Unit Cooling Only Air Conditioner EWAT032CZH-A1

Routine cleaning of air heat exchanger surfaces is essential to maintain proper operation of the unit, avoid corrosion and rusting.

Elimination of contamination and removal of harmful residues will greatly increase the life of the coil and extend the life of the unit.

Steps for cleaning the air heat exchanger:

Galvanic corrosion of the connection Copper/Aluminum can occurre in corrosive atmosphere under the plastic protection; during the maintenance operations or periodic cleaning, check the aspect of the plastic protection of the copper/aluminum connection. If it is inflated, damaged or took off contact the manufacturer representative for advice and information.

Sign off on the air heat exchanger maintenance

Reading of operating data (Note 3: Daily reading of the operating values of the unit allows maintaining high observational standards)

Visual inspection of unit for any damage and/or loosening

Verification of thermal insulation integrity

Analysis of water (Note 4: Check for any dissolved metals.)

Verification of control sequence

Verify contactor wear - Replace if necessary

This unit must be maintained by qualified technicians. Before beginning any work on the system, the personnel shall assure that all security precautions have been taken.

Neglecting unit maintenance could degrade all parts of the units (coils, compressors, frames, pipes, etc.) with negative effect on performances and functionality.

There are two different levels of maintenance, which can be chosen according to the type of application (critical/noncritical) or to the installation environment (highly aggressive).

Examples of critical applications are process cooling, data centres, etc.

Highly Aggressive Environments can be defined as the follows:

• Industrial environment (with possible concentration of fumes result of combustion and chemical process);

• Highly polluted urban environment;