Daikin Air Conditioner FFA50A2VEB

NOTICE! Never inspect or service the unit by yourself. Ask a qualified service person to perform this work.

WARNING! Never replace a fuse with a fuse of a wrong ampere ratings or other wires when a fuse blows out. Use of wire or copper wire may cause the unit to break down or cause a fire.

CAUTION! Do NOT insert fingers, rods or other objects into the air inlet or outlet. Do NOT remove the fan guard. When the fan is rotating at high speed, it will cause injury.

CAUTION! After a long use, check the unit stand and fitting for damage. If damaged, the unit may fall and result in injury.

NOTICE! Do not wipe the controller operation panel with benzine, thinner, chemical dust cloth, etc. The panel may get discoloured or the coating peeled off.

Is the controller operation panel clean?

CAUTION! Before accessing terminal devices, make sure to interrupt all power supply.

NOTICE! When cleaning the heat exchanger, make sure to remove the switch box, fan motor, drain pump and float switch. Water or detergent might deteriorate the insulation of electronic components and result in burnout of these components.

WARNING! Do NOT let the indoor unit get wet. Possible consequence: Electric shock or fire.

Never inspect or service the unit by yourself. Ask a qualified service person to perform this work.

However, as end user, you may clean the air filter, suction grille, air outlet and outside panels.

Never replace a fuse with a fuse of a wrong ampere ratings or other wires when a fuse blows out.

Use of wire or copper wire may cause the unit to break down or cause a fire.

Do NOT insert fingers, rods or other objects into the air inlet or outlet.

Do NOT remove the fan guard. When the fan is rotating at high speed, it will cause injury.

Never inspect or service the unit by yourself. Ask a qualified service person to perform this work.

However, as end user, you may clean the air filter, suction grille, air outlet and outside panels.

Never replace a fuse with a fuse of a wrong ampere ratings or other wires when a fuse blows out.

Use of wire or copper wire may cause the unit to break down or cause a fire.

Do NOT insert fingers, rods or other objects into the air inlet or outlet.

Do NOT remove the fan guard. When the fan is rotating at high speed, it will cause injury.

NOTICE! Never inspect or service the unit by yourself. Ask a qualified service person to perform this work. However, as end user, you may clean the air filter, suction grille, air outlet and outside panels.

WARNING! Never replace a fuse with a fuse of a wrong ampere ratings or other wires when a fuse blows out. Use of wire or copper wire may cause the unit to break down or cause a fire.

CAUTION! Do NOT insert fingers, rods or other objects into the air inlet or outlet. Do NOT remove the fan guard. When the fan is rotating at high speed, it will cause injury.

CAUTION! After a long use, check the unit stand and fitting for damage. If damaged, the unit may fall and result in injury.

NOTICE! Do not wipe the controller operation panel with benzine, thinner, chemical dust cloth, etc. The panel may get discoloured or the coating peeled off. If it is heavily dirty, soak a cloth in water-diluted neutral detergent, squeeze it well and wipe the panel clean. Wipe it with another dry cloth.

CAUTION! Before accessing terminal devices, make sure to interrupt all power supply.

NOTICE! When cleaning the heat exchanger, make sure to remove the switch box, fan motor, drain pump and float switch. Water or detergent might deteriorate the insulation of electronic components and result in burnout of these components.

NOTICE! Do NOT use water of 50°C or higher. Possible consequence: Discoloration and deformation.