Crown Pallet Truck PR3000

Test drive in an uncongested area

Operate the truck slowly in both directions

Operate through the full speed range in both forward and reverse

Check braking distance in forward and reverse

Load size and floor conditions can affect these distances

Know the distance it takes to stop before you start working

If the braking distance is too long to stop safely, don't use the truck

- WHEN YOU INSTALL OR CHANGE AN INDUSTRIAL BATTERY:

• Turn the truck OFF. Check that all controls are in neutral

• Make certain you use the correct size and weight battery

Never operate a truck that has an underweight or undersized battery installed

• Never let anything metal touch the top of the cells. You could cause sparks or do damage to the battery. Use an insulator (such as plywood) when necessary

• Use an approved spreader bar to place a battery in, or remove it from, the battery compartment or a stand

Make sure you adjust the spreader bar hooks to fit the battery

If you use a roller stand to install or remove a battery make sure the roller stand is the same height as the rollers in the truck's battery compartment. Also make sure the roller stand is at least as long as your battery

CHECK YOUR TRUCK BEFORE STARTING WORK

Battery retainers on both sides of the truck are properly installed

All wheels are in good condition

Both forks are straight and not cracked or badly worn

Load backrest is in place and fastened