The Case Tractor 210 is a robust agricultural asset designed for efficient farming operations. Known for its reliability and power, this model offers exceptional performance in various tasks, making it a preferred choice among farmers and contractors alike. Regular maintenance ensures optimal functionality and longevity of the Case Tractor 210.

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant

PDF MANUAL

Manual for Case Tractor 210

MAINTENANCE RESOURCES

Complete asset maintenance, one click away

Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.

Documents & Manuals

Find all the essential guides in one place.

Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more

Work Order Templates

Pre-built workflows to keep your asset running smoothly.

Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more

Procedures

Integrate maintenance plans directly into your work orders.

Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more

Parts

Access the parts list for your equipment in MaintainX.

Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Case Tractor 210

Create an account to install this asset package.

Maintenance Plans for Case Tractor Model 210

Integrate maintenance plans directly into your work orders in MaintainX.

100 Hourly Spark Plug Cleaning

Warning: Do not use a machine that cleans the spark plugs with grit.

Use a small knife or wire brush to clean the tip and threads.

Wash with a solvent to remove loose carbon and oil.

Dry with a clean cloth.

Set the gap. You will feel a small amount of pressure on the feeler gauge when the gap is correct.

IMPORTANT: Do not bend the center tip.

Sign off on the spark plug cleaning

Run this procedure

1 Daily Clutch And Brake Adjustment

IMPORTANT: You must have 1/4" (6 mm) clearance between the spring arm on the clutch/brake pedal and the tractor tower at all times. Check this clearance daily. (More frequently when a new belt is first installed.) If the spring arm makes contact with the tractor tower, the belt can slip and be damaged.

1. Disengage the clutch/brake pedal so the clutch belt has tension.

2. Check the clearance between the spring arm (on the clutch/brake pedal) and the tractor tower. The clearance must be 1/4" (6 mm).

3. To adjust the clutch rod follow this procedure:

a. Loosen the two lock nuts on the clutch rod.

b. Turn the lock nuts as required to get the 1/4" (6 mm) clearence

c. Tighten the lock nuts and check the clearance again

4. To adjust the brake follow this procedure:

a. Push the clutch/brake pedal and engage the parking brake lock in the middle notch.

Run this procedure

25 Hourly / 1 Weekly Tractor Maintenance

Drain Engine Oil

Change Engine Oil

Check Air Leaks

Grease Front Axle Pivot Pin

Oil Implement Lever, Brake Linkage

Check Battery

1. Add distilled water, as required, to keep the water level above the cell separators. Check at 25 hour intervals of operation or every week. Normal water consumption is 1 ounce (30 ml) every 25 hours of operation. More than normal water consumption indicates:

a. a battery with a leak

b. a regulator rectifier that is charging too much

Run this procedure

500 Hourly / 1 Yearly Tractor Maintenance

Drain Transmission Oil

Change Transmission Oil

Clean Engine Cooling Fins

Change Air Cleaner Element

Check Engine Cylinder Head

Clean Engine Cylinder Head

Sign off on the tractor maintenance

Run this procedure