Bunn Brewer PN:39200.0001

Warning: Do NOT clean this equipment with a water jet device

Cleaned all surfaces on Bunn-O-Matic equipment with a damp cloth rinsed in any mild, nonabrasive, liquid detergent

Checked and cleaned each sprayhead

Note: Any buildup on the sprayhead may restrict water flow, and impact your coffee brewing. For consistently great coffee, clean sprayheads weekly.

Removed sprayhead from brewer and disassembled by removing the seal

Used the pointed end of sprayhead cleaning tool to remove any mineral deposits from the sprayhead holes

Inserted the long end of sprayhead cleaning tool into the sprayhead fitting, and rotated several times to remove any mineral deposits from the fitting

Inserted the short end of sprayhead cleaning tool into the bypass fittings, and rotated several times to remove any mineral deposits from the fitting

Reassembled sprayhead and reattached. Sprayhead only needs to be hand tightened

Remove screws that secure the front access panel. Remove the panel

Unfasten the hose clamp at the end of the drain hose. Remove the plug

Place the end of the drain hose in a drain or a container that has a minimum capacity of 16.0 gallons (60.5 liters)

Release the white clamp to drain water from the tank

When tank is empty, close the white clamp, replace the plug, and tighten the clamp at the end of the drain hose

Replace the front panel and tighten screws

Sign off on the brewer tank maintenance