Bunn Brewer G9

Warning: Unplug the grinder before the removal of any panel or grind chamber-housing parts

Clean all exterior surfaces using a damp cloth rinsed in any mild, nonabrasive, liquid detergent

Run a few cycles until all coffee in the grind chamber is dispensed and disconnect the grinder from the power source

Remove the upper front inspection panel

Remove the two screws holding the front cover to the burr housing and remove the burr housing front cover

Remove the rotor cup, shear plate burr rotor and motor shaft extension from the grinder

Clean the grind chamber with a dry stiff non-metallic bristle brush and wipe with a dry clean cloth

Reinstall the motor shaft extension, burr rotor, shear plate, rotor cup and front cover to the burr housing

Slide plates checked and cleaned

Burrs and grind chamber inspected and cleaned/replaced if necessary

Burrs and grind time adjusted to specifications for particulate size and throw weight

Sign off on the grinder maintenance