

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Bombardier Recreational Products Vehicle 1200 4-TEC
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
10000 km / 6000 mi / 3 Yearly Vehicle Maintenance
Warning: Spark plugs inspection or replacement requires an in-depth technical knowledge.
Spark plugs replaced
Enter the name of the person or shop who performed the spark plugs inspection or replacement
3D rave valves cleaned
Sign off on the vehicle maintenance
3000 km / 2000 mi / 1 Yearly Vehicle Maintenance
Perform pre-ride inspection
Check fault codes
Charge battery (on models with electric starter)
Adjust drive chain
Access to Chaincase
Open RH side panel.
Drive Chain Adjustment
Remove muffler.
Unscrew tensioner lock nut several turns.
500 km / 300 mi / 10 Hourly Oil Level Check
Warning: Operating the engine with an improper oil level may severely damage engine. Wipe off any spillage.
Make sure the engine is at normal operating temperature. The engine reaches its normal operating temperature when the rear radiator gets warm.
Place vehicle on a level surface.
Let engine run at idle for approximately 30 seconds.
Stop engine.
Remove the drive belt guard.
Remove dipstick from the filler tube, then wipe it clean.
Completely insert dipstick in the filler tube.
Remove dipstick and check the oil level.
6000 km / 4000 mi / 2 Yearly Vehicle Maintenance
Replace brake fluid
Clean and lubricate rewind starter
Replace fuel pump outlet filter
Inspect engine rubber mounts
Sign off on the vehicle maintenance
6000 km / 4000 mi Oil Replacement
WARNING: The engine oil can be very hot. Wait until engine oil is warm.
NOTICE: Engine oil and oil filter must be replaced at the same time.
Vehicle placed on a level surface
LH side panel removed
Drive belt guard removed
Dipstick removed
Access cover retaining screw removed and the other loosened
Access cover pivoted to clear the bottom pan opening
Drain plug area cleaned from underneath vehicle
Access the parts list for your equipment in MaintainX.
Brp Heavy Duty Cleaner
293 110 001
Long Life Antifreeze
219 702 685
Long Life Antifreeze (F)
619 590 204
Suspension Grease
293 550 033
Tensiometer
414 348 200
Brp Heavy Duty Cleaner
293 110 001
Long Life Antifreeze
219 702 685
Long Life Antifreeze (F)
619 590 204
Suspension Grease
293 550 033
Tensiometer
414 348 200
Brp Heavy Duty Cleaner
293 110 001
Long Life Antifreeze
219 702 685
Long Life Antifreeze (F)
619 590 204
Suspension Grease
293 550 033
Tensiometer
414 348 200
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













