Atlas Copco Stationary Air Compressor GA30 VSD 500V

Check that condensate is discharged during operation

Check air filter service indicator

Check coolers and condenser of dryer; clean if necessary every 3 Month

Remove and inspect air filter element (AF) every 3 Month;

Warning: Never remove the element while the compressor is running

For minimum compressor down-time, replace the dirty element by a new one

Discard the element when damaged

Air filter cover removed by turning it anti-clockwise?

Warning: Always wear protective gear while cleaning the coolers.

Removal of dirt from the coolers with a fibre brush

Cleaning by air jet in reverse direction of normal flow

Sign off on the cooler cleaning

Warning: Use only KLÜBERQUIET BOH 72 - 102 grease. Quantity: 24 g per bearing.

Did you order the correct type of grease from Atlas Copco?

Did you loosen the palm grip, lift the nozzle and turn it 90 degrees clockwise?

Did you run the Regreasing program from the Test submenu on the regulator?

After the regreasing program finished, did you loosen the palm grip, lift the nozzle and turn it back into its original position?

Did the compressor run for 30 minutes at minimum speed during the Regreasing program?

Was the compressed air blown off via the solenoid valve?

Compressor stopped and emergency stop button pressed

Oil filler plug unscrewed one turn

Upload a photo of the collected oil