Atlas Copco Oil-Injected Rotary Screw Compressor GA18VSD+

Check oil level. If needed, top up the oil

Check that condensate is discharged during operation

Compressor stopped and air outlet valve closed

Upload a photo of the condenser inlet before cleaning

Dirt removed from the condenser inlet with a vacuum cleaner

Condenser cleaned with an air jet in the reverse direction to normal flow using low pressure air

Compressed air nozzle kept more than 30 cm away from the condenser

Upload a photo of the condenser after cleaning

Dust removed from inside the dryer with a vacuum cleaner

Water or solvents not used for cleaning the condenser

Check coolers, clean if necessary

Remove the air filter element and inspect. Replace damaged or heavily contaminated elements

Check the filter elements of the electric cabinet. Replace if necessary

Warning: Ensure the compressor is stopped and voltage is switched off before proceeding.

Cover of the air filter removed?

Air filter service warning reset?

Sign off on the air filter element replacement

Compressor stopped and air outlet valve closed?

All parts under the coolers covered?

Service plate at the fan compartment removed?

Dirt removed from the coolers with a fibre brush?

Dirt removed from the fan with a fibre brush?

Cleaned with an air jet in the reverse direction to normal flow?