Ametek Moisture Analyzer 5800

Shut off sample and reference gas flows at sources

Unscrew the two ferrule nuts and disconnect the two sample lines from the dryer. Remove the dryer from its mount

Remove the fill plug and the filter and empty the contents of the dryer

Flush the inside of the dryer thoroughly with distilled or de-ionized water. Flush with methanol or isopropyl alcohol. Allow to dry completely

Fill the dryer with new, dry, molecular sieve

Install the fill plug and filter. Mount and secure the dryer in the proper position. Reinstall sample lines

Sign off on the dryer molecular sieve replacement

Analyzer and cell oven covers removed

Filler cap removed from the center of the generator lid

Plastic tubing placed on the end of a syringe

Tube end laid down to the center of the outside of the generator

Tube marked where it aligns with the top of the generator