Toyota Forklift 30-7FBCU20

Inspect Brush wear and sliding condition

Inspect Commentator contamination, damage

Clean hydraulic tank and oil stramer

Sign off on the electrical system maintenance

Inspect steering Wheel's play and looseness

Inspect steering Wheel's operating condition

Inspect steering valve for oil leakage

Inspect power steering for oil leakage

Inspect mounting and linkage looseness in power steering

Inspect knuckle king pin looseness

Sign off on the steering system maintenance

Abnormality in the upper portion of the battery case inspected

Magnetic Contactor for contact looseness, damage, abrasion inspected

Operating condition of the auxiliary contact, contamination, abrasion inspected

Check loosening at connections at the motor and retighten if loose. Check for any damage on insulation covering

Check battery fluid level and specific gravity

Check loosening at cylinder rod end. Retighten tie rod end set bolt if loose

Check bolts and nuts for tightness. Retighten where required

Grease all greasing points, king pins, rear axle center pin cap, etc

Sign off on the 40 Hour / 1 Week Maintenance

Replace Hydraulic Return Oil Filter

Sign off on the replacement procedure