

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

TECO Inverter N3-205-C
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
1 Daily Inverter Check
Visual Inspection
Check for excessive dust or debris
Clean fan if dust or debris is found
Check for unusual odor or leakage
Action if abnormalities are found
Electrical Inspection
Measure the voltage with a multi-tester
Is the voltage correct according to specifications?
Correct input voltage if necessary
Cover Replacement
Appendix D – N3 Cover Removal Procedure for Various Frame Sizes
Ensure power is disconnected and wait 5 minutes
Is the charge indicating lamp off?
N3 Frame Sizes 1 & 2
Loosen the mounting screw completely
Push in on the sides of the cover at points “A” and lift and remove the cover
Set the cover and snap into place and secure with the mounting screw
N3 Frame Size 3
Loosen the two mounting screws completely
1 Yearly Inverter Check
Ground Bonding Resistance Check
Measure the ground bonding resistance with a multi-tester
Is the ground bonding resistance correct for 200V series (below 100Ω)?
Is the ground bonding resistance correct for 400V series (below 10Ω)?
Secure Parts Inspection
Visually check for loose secure parts
Check secure parts with a screwdriver
Terminal Base Inspection
Visually check for terminal base damage
Access the parts list for your equipment in MaintainX.
Remote LED Keypad
N3-LED-W
Remote LCD Keypad
N3-LCD-W
Keypad Remote Cable Kit, Length 1.6 Ft / 0.5 M
SW305P
Keypad Remote Cable Kit, Length 3.3 Ft / 1.0 M
SW3001
Keypad Remote Cable Kit, Length 6.6 Ft / 2.0 M
SW3002
Remote LED Keypad
N3-LED-W
Remote LCD Keypad
N3-LCD-W
Keypad Remote Cable Kit, Length 1.6 Ft / 0.5 M
SW305P
Keypad Remote Cable Kit, Length 3.3 Ft / 1.0 M
SW3001
Keypad Remote Cable Kit, Length 6.6 Ft / 2.0 M
SW3002
Remote LED Keypad
N3-LED-W
Remote LCD Keypad
N3-LCD-W
Keypad Remote Cable Kit, Length 1.6 Ft / 0.5 M
SW305P
Keypad Remote Cable Kit, Length 3.3 Ft / 1.0 M
SW3001
Keypad Remote Cable Kit, Length 6.6 Ft / 2.0 M
SW3002
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













