Star Two-Sided Grills GR10T

Ensure the power is turned off and the unit is unplugged

Verify the unit is not too hot before starting the cleaning process

Apply carbon removal agent according to the instructions provided with the cleaner

Use only cleaners safe for aluminum and iron surfaces

Wipe with a clean sponge or towel until the unit is clean

Remove and empty the grease catcher drawer, clean with mild detergent and water

Use a damp cloth and a non-silicated, non-abrasive, non-chlorinated cleaner for end of the day cleaning

Wipe surface clean with a clean wet cloth after cleaning

Use a clean cloth and good non-abrasive cleaner to clean the stainless steel body of the griddle

Wipe the control panel front with a soft cloth

Remove the waste drawer by pulling forward and out

Scrape off particles adhering to the cooking surface with a spatula.

Ensure no food is cooked onto the grill to prevent sticking and smoking.

Wipe down all surfaces with a warm, damp cloth and mild detergent.

Dry all surfaces after cleaning.

Check for carbon buildup on the cooking surface.

Describe any carbon buildup observed.

Apply two drops of non-toxic mineral or vegetable oil to counter balance shoulder rivets and plastic spacers

Check and clean brass rollers to ensure they are rolling and not sliding on the cam surfaces of the counterbalance

Check the bolts, screws, and nuts, tighten if necessary