Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.

Documents & Manuals

Find all the essential guides in one place.

Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more

Work Order Templates

Pre-built workflows to keep your asset running smoothly.

Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more

Procedures

Integrate maintenance plans directly into your work orders.

Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more

Parts

Access the parts list for your equipment in MaintainX.

Drive Motor
B2 Rollers
Tensioning System
+ 40 more

R&M Materials Handling Chain Hoist LK02

Create an account to install this asset package.

Maintenance Plans for R&M Materials Handling Chain Hoist Model LK02

Integrate maintenance plans directly into your work orders in MaintainX.

1 Yearly Mechanical Components Check

Check the condition of the chain sprocket. With two-fall hoists, also check the return sprocket

Check the condition of the chain guide

Check the fixing and the condition of the chain bucket

Check the greasing of the return sprocket bearing

Check the fastenings of the traveling machinery units

Check the condition of the trolley wheels

Check that the wheels are correctly aligned

Check the flange width

Check the condition of the bolted joints and load carrying structures

Run this procedure

1 Yearly Secondary/Output Shaft Lubrication

Warning: Use only lubricants recommended by the product’s manufacturer. Different kinds of greases shall not be mixed up.

Handle lubricants carefully. Prevent leakages to waters, sewers, cellars and other closed places.

Keep lubricants away from heat and open fires. Do not smoke.

Avoid contact with skin. Protection gloves and safety goggles shall be worn when handling lubricants. Hands shall be washed thoroughly after lubrication.

Keep lubricants away from food and drink. Do not inhale any fumes or swallow lubricants.

Used lubricant shall be handled as hazardous waste following local legal requirements. Store used lubricant in containers indicated for the purpose and dispose by a licensed company.

Grease nipples clean?

All slide bearings depressurized for the grease to penetrate?

Functioning of the bearings checked and no bearing slackness observed?

Run this procedure

1 Yearly Electrical Components Check

Check the condition and operation of the main switch

Check the condition of the wiring and the connections

Check the security of the fastenings in the electrical cubicle

Check the condition and operation of the contactors

Check the condition of the fuses

Run this procedure

Travelling Wheel Bearing Lubrication

Warning: Use only lubricants recommended by the product’s manufacturer. Do not mix different kinds of greases.

Handle lubricants carefully. Prevent leakages to waters, sewers, cellars and other closed places.

Keep lubricants away from heat and open fires. Do not smoke.

Avoid contact with skin. Protection gloves and safety goggles shall be worn when handling lubricants. Hands shall be washed thoroughly after lubrication.

Keep lubricants away from food and drink. Do not inhale any fumes or swallow lubricants.

Used lubricant shall be handled as hazardous waste following local legal requirements. Store used lubricant in containers indicated for the purpose and dispose by a licensed company.

Grease nipples clean?

All slide bearings depressurized for the grease to penetrate?

Functioning of the bearings checked and no bearing slackness observed?

Run this procedure

1 Yearly Chain Hoist Inspection

Check the condition of the fixing of the covers

Measure the wear of the chain

Check the condition of the rubber pad in the idle end of the chain (inside the chain bag)

Check the condition and readability of the warning etc. stickers

Check the readability of the instructions

Check the validity of the log book

Sign off on the chain hoist inspection