Ninebot (Beijing) Tech Scooter Commercial Kick Scooter ES4

Warning: Do not store or charge the battery at temperatures outside the stated limits. Do not puncture the battery.

Warning: Do not attempt to disassemble the battery. Risk of fire. No user serviceable parts.

Warning: Do not ride when the ambient temperature is outside the machine operation temperature because low/high temperature will limit the maximum power/torque. Doing so could cause personal injury or property damage due to slips or falls.

Battery stored at appropriate temperature?

Battery charged after each ride?

Enter the current battery temperature

Enter the current battery charge level

Enter any observed issues with the battery

Use a soft, wet cloth to wipe the mainframe clean. Hard to remove dirt can be scrubbed with a toothbrush and toothpaste, then cleaned with a soft, wet cloth. Scratches on plastic parts can be polished with fine grit abrasive paper.

Do not wash your KickScooter with alcohol, gasoline, acetone, or other corrosive/volatile solvents. These substances may damage the appearance and internal structure of your KickScooter. Do not wash your KickScooter with a power washer or hose.

Make sure the KickScooter is powered OFF, the charging cable is unplugged, and the rubber cap on the charge port is tightly sealed before cleaning; otherwise you may damage the electronic components.

Store your KickScooter in a cool, dry place. Do not store it outdoors for extended periods of time. Exposure to sunlight and temperature extremes (both hot and cold) will accelerate the aging process of the plastic components and may reduce battery life.