AES Akku Energie Systeme Battery eBike Akku 2.0 LongLife 48 V

Warning: Only trained personnel should perform this procedure

Is the AES eBike Battery 2.0 36 V / 48 V fully charged within 24 hours?

Is the AES eBike Battery 2.0 36 V / 48 V fully charged after 4 weeks at latest?

Is the AES eBike Battery 2.0 36 V / 48 V disconnected from the charger or an eBike before cleaning?

Is the charger disconnected from the power connection before cleaning?

The inside of the electrical connection socket of the AES eBike Battery 2.0 36 V / 48 V should be cleaned exclusively by expert personnel or by the manufacturer AES Akku Energie Systeme GmbH.

Are aggressive cleaners or solvents such as acetone avoided?

Is a soft, clean and lint-free cloth used for cleaning?

Sign off on the battery cleaning

Place the AES eBike Battery 2.0 36 V / 48 V next to the charger on a non-flammable surface

Ensure the battery and charger are not covered

Grip the charger plug correctly when plugging and unplugging

Position the battery to follow the charging progress on the charging status display

Connect the mains cable of the charger to a mains socket and the output cable to the battery

Ensure the charging status indicator on the display shows the correct status

Use a charger with a charging end voltage corresponding to the battery

Use an original charger or one approved by AES