Nidec Satellite Tracer LT-1200

CAUTION: Never use an organic solvent such as paint thinner. It may ruin the surface of the tracer.

Lightly wipe the exterior of the LCD. Do not press the LCD using an object with a hard tip. In addition, keep magnetic objects away from the LCD.

Never use a sponge or cloth soaked in water. The water may leak into the inside of the tracer and cause instrument failure.

Is the cover or panel of the tracer dirty?

Upload a photo of the dirty tracer

Did you clean the tracer with a soft cloth?

For stubborn stains, did you soak the cloth in a neutral detergent, wring well, and wipe?

Did you dry the tracer with a soft, dry cloth?

Upload a photo of the cleaned tracer

CAUTION! Before replacing fuses, be sure to turn off the power switch and disconnect the power cord from the wall outlet. Use the specified fuses only. (T 1 A 250 V) Replace all fuses at the same time.

Power cord disconnected from the wall outlet

Power cord disconnected from the inlet

Fuse holder under the inlet removed

Two fuses replaced with new ones

Fuse holder put back into its original position

Sign off on the fuse replacement