John Deere Tractor 4960

Check MFWD drive axle housing and wheel hub oil level

Check tension of alternator and compressor belts

Wash transmission-hydraulic oil filler cap breather filter

Check transmission-hydraulic oil level

Lubricate axle pivot pin, steering spindles, and tie rods

Lubricate MFWD kingpins and axle pivot

Perform daily or 10 hour service (See Lubrication and Maintenance/10 Hour section)

Avoid unnecessary engine idling.

Check engine oil level and coolant level more frequently. Watch for any sign of leaks

If engine oil must be added during break-in, use seasonal viscosity grade oil, meeting specifications given in Fuels, Lubricants, and Coolant section.

Check engine air intake system hoses and hose clamps for tightness.

Check and adjust drive belt tensions. Do not pry on alternator cover. Pry only on mounting brackets. (See Adjusting Belts in Service section)

Check and retighten wheel-to-rim and axle bolts after first 3 and 10 hours of operation. (See Wheels, Tires, and Treads section).

Sign off on the initial 100 hours maintenance

Transmission-hydraulic oil changed

Charge pump suction screen cleaned

MFWD hub and axle housing lubricant changed

Front wheel bearings cleaned and repacked

Sign off on the 1500 hourly maintenance

Have your John Deere dealer check nitrogen precharge of shift accumulators

Adjust engine valve clearance (Every 1000 Hours:)