Ingersoll Rand Mobile Compressor 9/270

* Every 1500 Hours Injection Nozzle Check

• Check Wheels (Bearings, Seals, etc.)

• Test Shutdown Switch Settings

• Check Scavenger Orifice & Related Parts

• Replace Oil Separator Element

Verify, during full–load (maximum compressed air delivery) that the IQ System filter restriction indicators do not show excessive restriction.

Restriction indicators for the filters are mounted inside the control panel.

Restriction indicators will shut down the compressor if restriction exceeds recommended values.

Check Air Cleaner Service Indicators

Check Fuel Tank (Fill at end of day)

Check Fuel/Water Separator Drain

Warning: This procedure requires trained personnel with PPE!

When grease, oil and dirt accumulate on the exterior surfaces of the oil cooler and radiator, the efficiency is impaired.

Oil cooler and radiator cleaned with compressed air and non-flammable cleaning solvent?

This should remove any accumulation of oil, grease and dirt from the exterior core of the cooler so that the entire cooling area can radiate the heat of the lubricating and cooling oil/water into the air stream.

Warning: Hot engine coolant and steam can cause injury.

When adding coolant or antifreeze solution to the engine radiator, stop the engine at least one minute prior to releasing the radiator filler cap.

Engine stopped at least one minute prior to releasing the radiator filler cap?

Using a cloth to protect the hand, slowly release the filler cap, absorbing any released fluid with the cloth.

Filler cap slowly released and any released fluid absorbed with a cloth?

Check Hoses (Oil, Air, Intake, etc.)

Check Automatic Shutdown System

Check Compressor heat exchanger exterior

Check Engine heat exchanger exterior

Sign off on the monthly mobile compressor maintenance