Hussmann Refrigerator D5X-LE EP U

Warning: Ensure the lamp is switched off before starting the procedure

Are the lamp holders, shields and end caps moisture resistant?

Are the lamp shields and end caps reinstalled after lamp replacement?

Does the switch in the canopy control all lamps in the merchandiser?

Sign off on the lamp replacement

Warning: Always replace lamp holders and end caps with Hussmann lamp holders and end caps

Did the lamp holder snap into the sheet metal of the case?

Does the lamp holder have a locking ‘nub’ which fits inside the groove of the end cap?

Upload a photo of the installed lamp holder and end cap

Sign off on the lamp holder and end cap replacement

Disconnect fan from wiring harness

Remove screws holding fan motor/bracket assembly to plenum and remove assembly

Replace fan motor/bracket assembly and reinstall screws

Reconnect fan to wiring harness

Use steel wool to smooth out the surface area of the bumper

Apply vinyl or car wax and polish surface for a smooth glossy finish

Upload a photo of the cleaned bumper

Sign off on the bumper cleaning

Door bumpers removed from tracks

Track wipe-outs used for cleaning

Soap and hot water used for cleaning

Brush used to remove accumulated debris

Sign off on the door track cleaning