Hussmann Refrigerator D5-8LEP

Door bumpers removed from tracks

Track wipe-outs used for cleaning

Soap and hot water used for cleaning

Brush used to remove accumulated debris

Sign off on the door track cleaning

Power to the merchandiser disconnected

Fluorescent lamps removed from the canopy

Screws securing the lamp panel removed

Lamp panel carefully pulled down

Ballast replaced and parts reassembled in reverse order

Sign off on the ballast replacement

Disconnect fan from wiring harness

Remove screws holding fan motor/bracket assembly to plenum and remove assembly

Replace fan motor/bracket assembly and reinstall screws

Reconnect fan to wiring harness

Warning: Always replace lamp holders and end caps with Hussmann lamp holders and end caps

Lamp holder snapped into the sheet metal of the case

Locking 'nub' of lamp holder fits inside the groove of end cap

Upload a photo of the installed lamp holder and end cap

Sign off on the lamp holder and end cap replacement

Warning: Always read and follow the manufacturer's instructions when using any cleaning product

Exterior surfaces cleaned with a mild detergent and warm water

Interior surfaces cleaned with domestic detergents, ammonia based cleaners or sanitizing solutions

Sign off on the cleaning procedure