

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant
Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.
Find all the essential guides in one place.
Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more
Pre-built workflows to keep your asset running smoothly.
Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more
Integrate maintenance plans directly into your work orders.
Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more
Access the parts list for your equipment in MaintainX.
Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Hoshizaki Stackable Crescent Cuber KM-1300SWH3
Create an account to install this asset package.
Integrate maintenance plans directly into your work orders in MaintainX.
Stainless Steel Exterior Cleaning
3. Maintenance
IMPORTANT
This icemaker must be maintained individually, referring to the instruction manual and labels provided with the icemaker.
1) Stainless Steel Exterior
To prevent corrosion, wipe the exterior occasionally with a clean and soft cloth. Use a damp cloth containing a neutral cleaner to wipe off oil or dirt build up.;
2 Weekly Air Filters Check
IMPORTANT: This icemaker must be maintained individually, referring to the instruction manual and labels provided with the icemaker.
Check the air filters for clogging.
Are the filters clogged?
If the filters are clogged, use warm water and a neutral cleaner to wash the filters.
Sign off on the air filters check
1 Yearly Condenser Check
Maintenance
IMPORTANT
This icemaker must be maintained individually, referring to the instruction manual and labels provided with the icemaker.
Condenser (Except water-cooled model)
Check the condenser once a year, and clean if required by using a brush or vacuum cleaner.
More frequent cleaning may be required depending on the location of the icemaker. Is more frequent cleaning required?
Sign off on the condenser check
Cuber Cleaning / Sanitizing
2. Cleaning and Sanitizing Procedures
IMPORTANT
Ensure all components, fasteners and thumbscrews are securely in place after any maintenance or cleaning is done to the equipment.
WARNING
1. HOSHIZAKI recommends cleaning this unit at least once a year. More frequent cleaning, however, may be required in some existing water conditions.
2. To prevent injury to individuals and damage to the icemaker, do not use ammonia type cleaners.
3. Always wear liquid-proof gloves to prevent the cleaning and sanitizing solutions from coming into contact with skin.
IMPORTANT
1. The cleaning valve is used to allow solution flow to the inside of the evaporator during the cleaning and sanitizing operation. It should be closed for all icemaking operation. The compressor will not operate unless this valve is completely closed.
Storage Bin and Scoop Cleaning
3. Maintenance
IMPORTANT
This icemaker must be maintained individually, referring to the instruction manual and labels provided with the icemaker.
2) Storage Bin and Scoop
• Wash your hands before removing ice. Use the plastic scoop provided.
• The storage bin is for ice use only. Do not store anything else in the bin.
• Keep the scoop clean. Clean it by using a neutral cleaner and rinse thoroughly.
• Clean the bin liner by using a neutral cleaner. Rinse thoroughly after cleaning.;
Access the parts list for your equipment in MaintainX.
Controller Board
2A1410-01
High Thermal Conductive Type Sealant
4A0683-01
Controller Board
2A1410-01
High Thermal Conductive Type Sealant
4A0683-01
Controller Board
2A1410-01
High Thermal Conductive Type Sealant
4A0683-01
MaintainX CoPilot is your expert colleague, on call 24/7, helping your team find the answers they need to keep equipment running.
Reduce Unplanned Downtime
Ensure your team follows consistent procedures to minimize equipment failures and costly delays.
Maximize Asset Availability
Keep your assets running longer and more reliably, with standardized maintenance workflows from OEM manuals.
Lower Maintenance Costs
Turn any technician into an expert to streamline operations, maintain more assets, and reduce overall costs.
Thousands of companies manage their assets with MaintainX













