The Hobart Mixer HL1400 is a high-performance industrial mixer designed for heavy-duty applications. Known for its durability and efficiency, this mixer is ideal for food processing and other industries requiring reliable mixing solutions. Ensure optimal performance with regular maintenance and quality spare parts.

Turn manuals into instant answers
with your AI-powered assistantTurn manuals into instant answers
with your AI-powered assistant

PDF MANUAL

Manual for Hobart Mixer HL1400

MAINTENANCE RESOURCES

Complete asset maintenance, one click away

Get instant access to all the maintenance information you need. Empower technicians to perform preventive maintenance with asset packages, ready to use right out of the box.

Documents & Manuals

Find all the essential guides in one place.

Tensioning Guide
Belt-diagram
C-120 pulleys
+ 13 more

Work Order Templates

Pre-built workflows to keep your asset running smoothly.

Daily Electrical System Inspection
Replace Roller and Pulley
Install Engine B-120
+ 29 more

Procedures

Integrate maintenance plans directly into your work orders.

Motion Industries
Applied Industrial Technologies
Electrical Brothers
+ 5 more

Parts

Access the parts list for your equipment in MaintainX.

Drive Motor
B2 Rollers
Tensioning System
+ 40 more

Hobart Mixer HL1400

Create an account to install this asset package.

Maintenance Plans for Hobart Mixer Model HL1400

Integrate maintenance plans directly into your work orders in MaintainX.

1 Daily Mixer Cleaning

WARNING! Disconnect the electrical power to the mixer and follow lockout / tagout procedures

Mixer and accessories cleaned with hot water and mild soap solution

Rinsed with either a mild soda or vinegar solution

Thoroughly rinsed with clear water

Mixer thoroughly cleaned daily

Mixer washed with a clean, damp cloth

Base cleaned under the mixer

Apron removed for cleaning by loosening the thumb screws

Drip cup-splash guard assembly removed periodically and wiped clean

Run this procedure

1 Yearly Interlock Safety System Maintenance

WARNING! Disconnect the electrical power to the mixer and follow lockout / tagout procedures

WARNING! Do not remove any covers or loosen any fittings while the mixer is operating

Ensure the electrical supply has been isolated before attempting to service or move the mixer

WARNING! The electronic drive control is fitted with high voltage capacitors. Isolate the mixer from the mains and allow the capacitors to discharge for 5 minutes before removing any covers

WARNING! Only Hobart trained service personnel or other properly trained and qualified personnel should carry out service

Inspection of the mixer's safety system

Operation check of the wire cage and bowl support interlock switches

Select the type of service done

Sign off on the safety system maintenance

Run this procedure

1 Yearly Transmission Belt Maintenance

- Inspect the transmission belt yearly for wear and replace by a Hobart Service Technician if worn

- Check transmission oil level

1. To check the oil level, remove the top cover, which is secured by two screws

2. Remove the Transmission Fill Plug and check the oil level

3. If the oil level is below the line on the oil dipstick, add a small amount of the recommended transmission oil until it returns to the proper level

4. Do not overfill the transmission, as leakage may result. Contact your local Hobart Service Office for the recommended transmission oil;

Run this procedure

6 Monthly Slideways Maintenance

Lubrication Process

Lowered the bowl support fully?

Removed the apron secured by thumb screws?

Applied a thin coat of Lubriplate 630AA on the bowl pad area of the bowl supports?

Applied Lubriplate 630AA on each slideway?

Installed the apron?

Note: Occasionally, the planetary seal may become dry and begin to squeak.

Worked a little lubrication (mineral oil) under the lip of the seal?

The agitator shaft should be lubricated twice a year with a thin coat of mineral oil.